Graco 312184B Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pulvérisateur de peinture Graco 312184B. Graco 312184B User's Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
312184B
EN
Instructions - Parts List
Accessory Hopper Kit
Pressure Relief Procedure
Follow the Pressure Relief Procedure whenever you
see this symbol.
1. Engage trigger lock.
2. Turn ON/OFF switch to OFF.
3. Unplug power cord.
4. Disengage trigger lock. Hold metal part of gun against
grounded metal pail and trigger gun into pail to relieve
pressure.
5. Engage the trigger lock.
6. Open all fluid drain valves in the system, having a waste
container ready to catch drainage. Leave drain valve(s)
open until you are ready to spray again.
7. If you suspect the spray tip or hose is clogged or that pres-
sure has not been fully relieved after following the steps
above, VERY SLOWLY loosen tip guard retaining nut or
hose end coupling to relieve pressure gradually, then
loosen completely. Clear hose or tip obstruction.
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing fluid and
moving parts, follow the Pressure Relief Procedure when
you stop spraying and before cleaning, checking, or
servicing the equipment.
Ref. Part Description Qty
1 188787 HOPPER, 1.5 gallon 1
2 112133 SCREEN, hopper 1
3 287049 TUBE, inlet, hopper 1
4 15E813 NUT, jam 1
5 15B652 WASHER, suction 1
6 104938 PACKING, o-ring 1
7 117559 O-RING 2
2
6
3
5
4
7
1
ti25586a
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - Accessory Hopper Kit

312184BENInstructions - Parts ListAccessory Hopper KitPressure Relief ProcedureFollow the Pressure Relief Procedure whenever you see this symbol.1. En

Page 2 - 2. Remove suction set

2 312184B1. Follow Pressure Relief Procedure.2. Remove suction set.3. Remove hopper lid. Insert hopper tube into pump.4. Hand-tighten jam nut. Place

Page 3 - 312184B 3

312184B 3Notes

Page 4 - Graco Information

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves th

Commentaires sur ces manuels

Pas de commentaire