Graco 308652Y Manuel d'utilisateur télécharger pdf (Page 10)

10 308652

Troubleshooting

Relieve the pressure before you check or service the

equipment.

Check all possible problems and causes before you

disassemble the pump.

WARNING

To reduce the risk of serious injury whenever you

are instructed to relieve pressure, always follow the

Pressure Relief Procedure on page 8.

Internal Air Valve-Operated and Remote Solenoid-Operated Pumps

PROBLEM CAUSE SOLUTION

The pump cycles at stall, or it fails

to hold pressure at stall.

The check valves (20) or o-rings

(21) are leaking.

Replace the check valves and/or

o-rings. See page 14.

The check valves (20) are worn. Replace the check valves.

See page 14.

Debris is stuck between the a check

valve (20) and the seat.

Clean the check valve/seat area.

See page 14.

The pump operates erratically. The suction line is clogged. Inspect and clear the line.

The check valves (20) are sticking

or leaking.

Replace the check valves, or clean

and check the valve/seat area.

See page 14.

A diaphragm (30) is ruptured. Replace the ruptured diaphragm.

See page 13.

There are air bubbles in the fluid. The suction line is loose. Tighten the suction line.

A diaphragm (30) is ruptured. Replace the ruptured diaphragm.

See page 13.

The manifold (52) is loose, or the

o-rings (21) are damaged.

Tighten the manifold screws (58).

Replace the o-rings (21).

See page 14.

The fluid covers (51) are loose. Tighten the fluid cover screws (58).

See page13.

There is fluid in the exhaust air. A diaphragm (30) is ruptured. Replace the ruptured diaphragm.

See page 13.

A diaphragm plate (50) is loose. Tighten the diaphragm plate.

See page13.

The pump exhausts air near the

fluid covers.

The fluid covers (51) are loose, or

the o-rings (57) are damaged.

Tighten the fluid cover screws (58),

or replace the o-rings. See page13.

The pump exhausts air near the air

valve.

The air valve cover screws (14) are

loose.

Tighten the screws. See page 12.

The top (5) and/or side (6) air valve

o-rings are damaged.

Replace these o-rings.

See the Parts Drawing on

page 17.

The pump leaks fluid from the

check valves.

The o-rings (21) are leaking, or the

screws (58) are loose.

Replace these o-rings, and tighten

the screws. See page 14.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Graco 308652Y Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Pompes à eau Graco 308652Y