Graco 3A0735J Manuel d'utilisateur télécharger pdf (Page 14)

Service

14 3A0735J

Reconnect the Pump

1. Ram-mounted pumps: Set the displacement pump

in place, then attach the clamp. Align the air motor

and set it on top of the displacement pump. Attach

the clamp. Replace the pin.

2. Other pumps: Slide the assembled displacement

pump into position on the air motor pump adapter

and reattach the clamp.

3. Hold the motor shaft up with one hand. With your

other hand, put the coupling nut (5) on the rod.

4. Put the coupling collars (4) into the coupling nut so

large flanges point upward.

5. Gently let the motor shaft drop onto the rod. Use a

spanner wrench to tighten the coupling nut securely.

6. Connect the remaining air and fluid hoses and the

ground wire.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Pas de commentaire

Graco 3A0735J Manuel d'utilisateur Page 14