Graco 3A1569B Manuel d'utilisateur télécharger pdf (Page 34)

Maintenance

34 3A1569B

Maintenance

• Check and add TSL to B side pump wet-cup daily.

• Check ISO lube bottle for significant discoloration or

crystallization daily. Replace with fresh TSL when

needed.

• Ensure ISO (A) pump is down and in PARK position

during every shutdown.

• Keep any ISO (A) fluid from being exposed to atmo-

sphere to prevent crystallization.

• Remove inlet filter screen plug (V, Y) and clean

screens if increased unbalanced pressures between

A and B is noticed or as needed for fluids used. Also

clean after flushing.

• Close gun fluid shutoff valves when not in use.

• If using a Fusion AP or Probler P2 gun, add grease

with grease gun per manual.

• Clean gun filter screens and mix chamber ports reg-

ularly, or when increased unbalanced pressures

between A and B is noticed. See gun manual.

• Use lithium grease or Iso Pump Oil on all threaded

fluid fittings on the “A” side.

1 2 ... 29 30 31 32 33 34 35 36 37 38

Pas de commentaire

Graco 3A1569B Manuel d'utilisateur Page 34